Specification
| Type | Water Softener |
| Process | Ion Exchange |
| Material | FRP |
| Pressure Rating | 5 kg/cm2 |
| Temperature | Below 60 degree celcius |
| Operating Mode | Manual |
| Working Hardness | upto 2000 ppm of CaCO3 |
| Output Hardness | Below 30 ppm of CaCO3 |
| Output Between Regeneration (liters) | Based on design |
| Output Between Salt Addition (liters) | Based on design |
| Water Source | Boring water, Tap water, Municipal Water |
| Salt Type | Consult your manual for the recommended salt type for optimal performance. |
| Warranty | 12 Months |
| Installation
& After Sales
Services | Yes |
Applications
- Home and apartments
- Process water for manufacturing plants
- Boiler feed water and cooling water make-up
- Beverage and food processing industry
- Hospital, hotel, institute, laundries and more
Item in the box
| Component | Qty |
|---|
| FRP Vessel* | 1 No. |
| Multiport Valve (Manual)* | 1 No. |
| Resin* | Quantity based on design |
| Brine Tank* | 1 No. |
| Skid (Optional)* | 1 No. |
| Pipe & Pipe Fittings* | Lump sump |
* Order Your Filter acts as your virtual assistant, and based on the input data provided, it designs and does the costing for you! All the dimensions, quantity, and brand of components will depend on the design and your choice of components.
The images shown are for illustration purposes only and may not be an exact representation of the product.
- In order to reduce the Water Softeners sizing and thus costing, it is highly recommended to install them before and near to your storage tank.
- The Water Softeners should be kept away from the heater or any heat outlet. It is also recommended that the Water Softeners should be installed under shed or provided a shed to protect it from direct sunlight & rain.
- The location should have access to a main water supply line to connect the
- The regeneration will be required after predefined time period based on the design of Water Softeners. The water flow will be required at the time of regeneration.
- The Water Softeners should be installed lower than overhead tank.
- The Water Softeners should be located close to the drain. The drain should not be beyond 10 feet from the installation location as well as should not be more than 5 feet above floor level.
- The installation location should be easily accessible, where all the equipment and materials can be carried easily.
- The installation location should have enough space for the Water Softeners unit and allows easy access for future maintenance and refills of salt. The refill of salt is required on predefined time interval depending on the design of system..
-
- Bypass line along with ball valves should be provided. Bypass line will greatly help in maintaining the Water Softeners.
- A non-return valve of good quality should be provided, so that water will not return during regeneration of the system.
-
The typical time required for Water Softener regeneration would be in between 90 to 120 minutes and consists of backwash, brine draw, slow rinse, and fast rinse.
Manual Water Softeners need to be manually regenerated on regular frequency as per the design of system.
